Cypress WPT - Page 27

27
Cypress Confidential
Start/Stop Range Test
1. Turn on Receiver by pressing the ▲ button once. The LCD
will display the RKIT ID.
2. Turn on the Transmitter by pressing the ▲ button once. The
LCD will show the RSSI scale. The override indicator will
flash every time a data packet is sent (once per second).
3. Turn off the Receiver by pressing the ▲ button, which will
return the device to low-power idle mode. Notice that “--” is
displayed on the LCD. This is because the Transmitter can no
longer find the Receiver.
4. Turn off the Transmitter by pressing the ▲ button, which
will return the device to low-power idle mode.
Reference: WPT Wireless Range Tester Kit User Manual - Section 4.4