26
Cypress Confidential
Select an RKIT ID
1. While the Transmitter is in low–power idle mode, hold down
and release all three buttons.
2. When the RKIT ID is flashing on the display, press the ▲ or
▼ button to change the ID.
3. Once the correct ID is chosen, press the OVR button to store
the new ID, and the device will go back to low–power idle
mode.
4. Repeat steps 1-3 for the Receiver
Up to 3 RKITs can be used simultaneously as long as they have
different RKIT IDs (A, B or C). Setup your RKIT to use the ID that is
written on the front cover of the Transmitter and Receiver.
Reference: WPT Wireless Range Tester Kit User Manual - Section 4.2
To Next Page
Loading...
