Cypress WPT - Page 51

To Next Page

To Previous Page

Cypress Confidential

Programming Repeater ID

1. Using the top and bottom buttons, change the right most digit (D1) to match the

right digit of the Repeater ID as written on the front of the RWAL and press the

center button to confirm

2. Using the top and bottom buttons, change the left most digit (D2) to match the left

digit of the Repeater ID as written on the front of the RWAL and press the center

button to confirm

NOTE: The Repeater will exit the programming mode automatically if there is no action for 1 minute.

Other manuals for Cypress WPT