To Next PageTo Next Page
Need help?Do you have a question about the D.A.C.E DURASWING and is the answer not in the manual?
Key factors influencing gate operator installation, including gate swing direction and mounting methods.
Diagram showing the general layout for a pedestal mount type installation.
Overview of the main printed circuit board, including component locations and connectors.
Guidance and warnings on electrical connections and safety precautions for installation.
Details on installing operators using Wall Mount and Pedestal Mount methods.
Specific guidelines and considerations for pedestal mount installations.
Explanation of additional functions like Party Mode and Overcurrent Sensing.
Description of the different LEDs on the PC board and their meanings.
Guidance for inward swing pedestal mount installation, including gate opening angles.
Guidelines for outward swing pedestal mount installation and gate opening angles.
Configuration of dipswitches for auto-close, safety beams, and multi-user modes.
Explanation of various connectors and their functions on the main PC Board.
Specifics for panhandle inward swing installations and gate opening angles.
Step-by-step guide for programming remotes to the on-board receiver.
Procedures for erasing all remotes or a single remote from the receiver.
Instructions for wiring the slave operator to the master unit.
Procedure for setting the open and closed limit switches for the gate operators.
General| Brand | D.A.C.E |
|---|---|
| Model | DURASWING |
| Category | Gate Opener |
| Language | English |
