Need help?Do you have a question about the D.A.C.E Compact 300 and is the answer not in the manual?
Electrical wiring safety and standards for installation.
Ensures gate and site are ready for automation installation.
List of essential tools required for gate operator installation.
Identifies potential entrapment hazards with automated gates.
Explains status messages on the Compact 300 LCD screen.
Details the meaning of various LEDs on the main circuit board.
Operation relies on battery; mains supply maintains charge.
Gate stops and re-opens if an obstruction is detected.
Ensures gate closes flush against the end stop or post.
Automatic gate closure after a set time delay.
Overview of major components in Compact 500 and 300 motors.
Wiring instructions for adding an optional radio receiver.
Wiring guide for different types of intercom systems.
Basic site diagram showing component placement and infra-red beams.
Checks for flood level, rail condition, and obstructions.
Guidelines for connecting external devices to the P.C. Board.
Recommended wiring for infra-red safety beams.
Configuring the automatic gate closure time delay.
Checking gate for level, movement, and end stops.
Overrides auto-close, keeping the gate open.
Handles multiple trigger inputs in busy areas.
Procedure for placing the motor in manual operation mode.
Steps to pair remote controls with the receiver.
Methods for erasing all or single remotes from the receiver.
Steps to program the motor to the gate's movement.
Identification of connectors and components on the main circuit board.
Adjusting force sensitivity to detect obstructions.
Detailed guide for safe and correct electrical connections.
Wiring adjustments for gate closing left or right.
Procedure to program motor for correct gate operation.
Attaching the gate rack to ensure proper meshing with the pinion.
Positioning the magnetic sensor for gate operation (Compact 500).
Instructions for creating a firm foundation for the motor.
Steps to firmly attach the motor to its base plate.
General| Model | Compact 300 |
|---|---|
| Max Gate Weight | 300 kg |
| Motor Voltage | 24V DC |
| Operating Temperature | -20°C to +55°C |
| Power Supply | 230V AC |
| Motor Type | DC Motor |
To Next Page
