D-Link AirPremier N DAP-2310

19D-Link DAP-2310 User Manual
Section 3 - Conguration
WDS with AP mode
Select 2.4GHz from the drop-down menu.
WDS with AP mode is selected from the drop-
down menu.
Service Set Identier (SSID) is the name designated
for a specic wireless local area network (WLAN).
The SSID’s factory default setting is dlink. The SSID
can be easily changed to connect to an existing
wireless network or to establish a new wireless
network.
Enable or Disable SSID visibility. Enabling this
feature broadcasts the SSID across the network,
thus making it visible to all network users.
Enabling this feature automatically selects
the channel that will provide the best wireless
performance. This feature is not supported
in WDS with AP mode. The channel selection
process only occurs when the AP is booting up.
To change the channel, use the drop-down menu
to make the desired selection. (Note: The wireless
adapters will automatically scan and match the
wireless settings.)
Indicates whether the device is capable of 20MHz
operation only or both 20MHz and 40MHz
operation.
Wireless Band:
Mode:
Network Name
(SSID):
SSID Visibility:
Auto Channel
Selection:
Channel:
Channel Width:
In WDS with AP mode, the DAP-2310 wirelessly connects multiple networks while still functioning as a wireless AP.