D-Link AirPremier N DAP-2310

25D-Link DAP-2310 User Manual
Section 3 - Conguration
AP Repeater mode
Mode:
Network Name
(SSID):
SSID Visibility:
Auto Channel
Selection:
Channel:
Channel Width:
Site Survey:
Authentication:
Wireless Band:
2.4 GHz
AP Repeater is selected from the pull-down menu.
Service Set Identier (SSID) is the name designated for
a specic wireless local area network (WLAN). The SSID’s
factory default setting is dlink. The SSID can be easily
changed to connect to an existing wireless network.
This option is unavailable in AP Repeater mode.
Enabling this feature automatically selects the channel
that will provide the best wireless performance. This
feature is not supported in AP Repeater mode.
The channel used will be displayed, and matches the
AP that the DAP-2310 is connected to when set to AP
Repeater mode.
Use the pull-down menu to choose 20 MHz or Auto
20/40 MHz.
Click on the Scan button to search for available wireless
networks, then click on the available network that you
want to connect with.
Use the pull-down menu to choose Open System or WPA-Personal.
Select Open System to communicate the key across the network.
Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required.