D-Link DAP-1120 - System Operations

28D-Link DAP-1120 User Manual
Section 3 - Web-based Conguration
Save the system settings onto a le to the local hard drive.
You will then see a le dialog where you can select a location
and le name for the settings.
Load the system settings from a le on the local hard drive.
Restore the system settings to factory default settings. This
will erase all currently stored settings.
Click Reboot to reboot the DAP-1120.
Save Settings
To Local Hard
Drive:
Load Settings
From Local
Hard Drive:
Restore
to Factory
Default
Settings:
Reboot the
Device:
System
This page allows you to save or restore your system conguration, reset or reboot the DAP-1120. To access this page, click on
the Management drop down menu at the top of the page, and select System. Click Save at any time to save the changes
you have made on this page.