DAP-1155 Wireless N 150 Access Point & Router
User Manual
Configuring Device (Router Mode)
Additional Settings
On the Wi-Fi / Additional settings page, you can define additional parameters for the WLAN of
the access point.
!
Changing parameters presented on this page may negatively affect your WLAN!
Figure 133. Additional settings of the WLAN.
The following fields are available on the page:
Parameter Description
Station Keep Alive
The time interval (in seconds) between keep alive checks of wireless
devices from your WLAN. When the value 0 is specified, the
checking is disabled.
Beacon Period
The time interval (in milliseconds) between packets sent to
synchronize the wireless network.
RTS Threshold
The minimum size (in bites) of a packet for which an RTS frame is
transmitted.
Frag Threshold
The maximum size (in bites) of a non-fragmented packet. Larger
packets are fragmented (divided).
DTIM Period
The time period (in seconds) between sending a DTIM (a message
notifying on broadcast or multicast transmission) and data
transmission.
Page 171 of 215
To Next Page
Loading...
