DAP-1155 Wireless N 150 Access Point & Router
User Manual
Configuring Device (Access Point Mode)
System
In this menu you can do the following:
• change the password used to access the access point's settings
• save the current settings to the non-volatile memory
• create a backup of the access point's configuration
• restore the access point's configuration from a previously saved file
• restore the factory default settings
• view the system log
• update the firmware of the access point
• check availability of a host on the Internet through the web-based interface of the access
point
• allow or forbid access to the access point via TELNET
• switch the device to the other mode.
Page 77 of 215
To Next Page
Loading...
