DAP-1155 Wireless N 150 Access Point & Router
User Manual
Configuring Device (Router Mode)
Figure 147. The page for adding a rule for IP filtering.
You can specify the following parameters:
Parameter Description
IP filter rule editing
Name A name for the rule for easier identification.
Protocol
A protocol for network packet transmission. Select a value from the
drop-down list.
Action
Select an action for the rule.
ACCEPT: Allows packet transmission in accordance with the
criteria specified by the rule.
DROP: Denies packet transmission in accordance with the criteria
specified by the rule.
IP Addresses
IP address range
Select the checkbox if you want to specify a range of IP addresses as
the source or destination IP address.
Page 189 of 215
To Next Page
Loading...
