DAP-1155 Wireless N 150 Access Point & Router
User Manual
Configuring Device (Access Point Mode)
Figure 54. The page for configuring the client mode.
To configure the access point as a client, select the Enable client checkbox. When the checkbox is
selected, the following fields are displayed on the page:
Parameter Description
SSID
The name of the network to which the access point connects.
BSSID
The unique identifier of the network to which the access point
connects.
Network Authentication
The authentication type of the network to which the access point
connects.
Page 73 of 215
To Next Page
Loading...
