6D-Link DAP-1365 User Manual
Section 1 - Product Overview
3
2
1
Hardware Overview
Side
1 WPS Button
Press to establish a connection with another WPS compatible device. Pressing the WPS button for 1 second allows
you to connect with Wi-Fi clients using Wi-Fi Protected Setup. Refer to “WPS-PBC Conguration” on page 15 for
more information.
2
LAN Connect an Ethernet cable if you are adding wireless to an existing wired network.
3
Reset Button Use an unfolded paperclip to press and hold the reset button on the bottom of DAP-1365 for 10 seconds.
To Next Page
Loading...
