45D-Link DCS-910 User Manual
Section 3 - Configuration
Choose which method to add your camera(s). You can choose Auto Discovery
to automatically search for your camera(s), or choose Add Manually to add your
camera(s) via the camera’s IP address. Click Next to continue.
If you choose Auto Discovery, the system will search all available cameras that
are located on the same LAN with same subnet. The system will place all of the
cameras under the default map called My Map. Click Next to continue.
If you choose Add Manually, you will need to enter the IP address of the camera(s).
Click Next to continue.
DCS-910-55
To Next Page
Loading...
Need help?
General
