Click Save Settings to the left to save the current configuration.
8. How do I manually upgrade the firmware on my camera?
Note: All firmware upgrades should be done over a WIRED connection. If your camera is
currently configured for wireless, plug it directly into your router before proceeding.
Step 1: Download the latest firmware file for your device from
https://www.mydlink.com/support
Step 2: Open a web browser and enter the IP address of the camera in the address bar
(default is 192.168.0.20). Press Enter.
Step 3: The default username is admin and the password field should be left blank. Click OK.
Step 3: Click the Maintenance tab and then click Firmware Upgrade from the menu on the
left-hand side.
To Next Page
Loading...
