DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
279
DES-3028P:4# show mld_snooping
Command: show mld_snooping
MLD Snooping Global State : Disabled
Multicast router Only : Disabled
VLAN Name : default
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Listener Query Interval : 1
Node Timeout : 260
Router Timeout : 260
Done Timer : 2
Querier State : Disabled
Querier Router Behavior : Non-Querier
State : Disabled
Version : 2
VLAN Name : vlan2
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Listener Query Interval : 1
Node Timeout : 260
Router Timeout : 260
Done Timer : 2
Querier State : Disabled
Querier Router Behavior : Non-Querier
State : Disabled
Version : 1
Total Entries: 2
DES-3028P:4#
show mld_snooping group
Purpose Used to display the current MLD snooping group configuration on the
switch.
Syntax
show mld_snooping group {vlan <vlan_name 32>| vlanid
<vlanid_list>}
Description The show mld_snooping group displays the current MLD snooping
group configuration on the switch.
Parameters
<vlan_name 32> The name of the VLAN for which you want to view
MLD snooping group configuration information.
If no parameter specified, the system will display all current MLD
group snooping configuration of the switch.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To Next Page
Loading...
