D-Link DES-3052P - Page 285

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
280
To show MLD snooping group:
DES-3028P:4#show mld_snooping group
Command: show mld_snooping group
Source/Group : 2000::100:10:10:5/FF0E::100:0:0:20
VLAN Name/VID : default/1
Member Ports : 1-2
Filter Mode : INCLUDE
Source/Group : 2000::100:10:10:5/FF0E::100:0:0:20
VLAN Name/VID : default/1
Member Ports : 3
Filter Mode : EXCLUDE
Source/Group : NULL/FF0E::100:0:0:21
VLAN Name/VID : default/1
Member Ports : 4-5
Filter Mode : EXCLUDE
DES-3028P:4#
show mld_snooping mrouter_ports
Purpose Used to display the currently configured router ports on the switch.
Syntax
show mld_snooping mrouter_ports {vlan <vlan_name 32>|
vlanid <vlanid_list>}{static|dynamic|forbidden}
Description The show mld_snooping mrouter_ports command displays the
currently configured router ports on the switch.
Parameters
<vlan_name 32>  The name of the VLAN on which the router port
resides.
static  Displays router ports that have been statically configured.
dynamic  Displays router ports that have been dynamically
configured.
forbidden  Displays forbidden router ports that have been statically
configured.
If no parameter specified, the system will display all currently
configured router ports on the switch.
Restrictions None.
Example usage:
To display the router ports: