DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
321
DES-3028P:4#show address_binding ip_mac all
Command: show address_binding ip_mac all
IP Address MAC Address Mode Ports
--------------- ----------------- ---- --------------------
10.1.1.1 00-00-00-00-00-22 arp 1-28
Total Entries: 1
DES-3028P:4#
delete address_binding
Purpose Used to delete IP-MAC Binding entries.
Syntax
delete address_binding ip-mac [ipaddress <ipaddr> mac_address
<macaddr> | all] | blocked [all | vlan_name <vlan_name>
mac_address <macaddr>]]
Description This command will delete IP-MAC Binding entries. Two different kinds
of information can be deleted.
IP_MAC – Individual Address Binding entries can be deleted by
entering the physical and IP addresses of the device. Toggling
to all will delete all the Address Binding entries.
Blocked – Blocked address binding entries (bindings between
VLAN names and MAC addresses) can be deleted by entering
the VLAN name and the physical address of the device. To
delete all the Blocked Address Binding entries, toggle all.
Parameters <ipaddr> – The IP address of the device where the IP-MAC binding is
made.
<macaddr> – The MAC address of the device where the IP-MAC
binding is made.
<vlan_name> – The VLAN name of the VLAN that is bound to a MAC
address in order to block a specific device on a known VLAN.
all – For IP_MAC binding all specifies all the IP-MAC binding entries;
for Blocked Address Binding entries all specifies all the blocked VLANs
and their bound physical addresses.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To delete an IP-MAC Binding on the Switch:
To Next Page
Loading...
