D-Link DFE-530TX+ User Manual

4D-Link DFE-530TX+ User Manual
Section 1 - Product Overview
Introduction
The D-Link DFE-530TX+ is a 10/100Mbps Fast Ethernet 32-bit PCI Adapter for desktops, workstations, and servers.
The DFE-530TX+ supports a wide range of operating systems including Macintosh and Windows
®
.
With support for IEEE802.3 and IEEE 802.3u standards, the DFE-530TX+ supports 10BASE-T and 100BASE-TX
networks. The DFE-530TX+ utilizes auto-negotiation to automatically adjust to the highest supported transfer rates up
of to 200Mbps in full duplex mode.
D-Link’s DFE-530TX+ also supports optional advanced networking support features like Wake-On-LAN and Boot ROM.
Computers and operating systems that support the Advanced Configuration and Power Interface (ACPI) can remotely
wake your PC from anywhere on the network with Wake-On-LAN. With the addition of an optional Boot ROM with PXE
support, the DFE-530TX+ can support network booting of supported operating systems.

D-Link DFE-530TX+ Specifications

General

Interface	PCI
Data Transfer Rate	10/100 Mbps
Connector	RJ-45
Standards	IEEE 802.3, IEEE 802.3u
LED Indicators	Link/Activity
Device Type	Network adapter
Form Factor	Plug-in card
Connectivity Technology	Wired
Data Link Protocol	Ethernet, Fast Ethernet
Full Duplex Support	Yes
Ports	1 x RJ-45
Driver Support	Windows, Linux