7D-Link DFE-530TX+ User Manual
Section 2 - Installation
Warning: Do NOT install the DFE-530TX+ PCI Fast Ethernet Adapter into your computer before installing the
driver software from the D-Link CD.
Turn on the computer and Insert the D-Link DFE-530TX+ Driver CD in the CD-ROM drive. The step-by-step instructions
that follow are shown in Windows
®
XP. The steps and screens are similar for the other Windows operating systems.
If the CD Autorun function does not automatically start on your computer, go to Start > Run. In the run command box
type “D:\DFE530TX+.exe” (where D: represents the drive letter of your CD-ROM drive).
Drivers for non-Windows
®
operating systems are located on the D-Link CD.
Software Installation
When the autorun screen appears, click Install Drivers.
Installation
To Next Page
Loading...
