gw-world:/> add Interface InterfaceGroup examplegroup
Members=exampleif1,exampleif2
Web Interface
1. Go to: Interfaces > Interface Groups > Add > InterfaceGroup
2. Enter the following information to define the group:
• Name: The name of the group to be used later
• Security/Transport Equivalent: If enabled, the interface group can be used as a destination interface in
rules where connections might need to be moved between the interfaces.
• Interfaces: Select the interfaces to be in the group
3. Click OK
3.4.6. Interface Groups Chapter 3. Fundamentals
125
To Next Page
Loading...
