D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network Adapter

D-Link DGE-560T User Manual 22
Included on the CD-ROM is a “Virtual Cable Tester
®
” for D-Link DGE-560T. It will help you to detect potential cabling issues such as cable
opens, cable shorts, and impedance mismatches.
1. Insert the CD-ROM that came with your D-Link DGE-560T Gigabit PCI Express Ethernet Adapter into your CD-ROM
drive.
2. Choose Drivers > Virtual Cable Tester, and click Install the package.
3. Follow the instructions provided by the installation wizard.
4. Go to Start > Programs > Marvell > Virtual Cable Tester to start the program.
5. Select the network adapter you want to test, and click Run.