D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network Adapter

D-Link DGE-560T User Manual 3
Features of the DGE-560T Gigabit Cardbus PC Card:
• Complies with IEEE 802.3 10BASE-T Ethernet standard
• Complies with IEEE 802.3u 100BASE-TX Fast Ethernet standard
• Complies with IEEE 802.3ab/802.3z 1000BASE-T Gigabit Ethernet standard
• Complies with IEEE 802.3ad Link Aggregation Control Protocol standard
• Complies with IEEE 802.3x Flow-Control and Auto-Negotiation standard
• Complies with IEEE 802.1p Quality of Service standard
• Complies with IEEE 802.1q/802.3ac VLAN/VLAN Tagging standard
• Complies with PCI Express 1.0a specification
• Supports Crossover Detection & Auto-Correction
• Supports Jumbo Frames (up to 9K frame size)
• Built-in Transmit/Receive FIFO data buffer (48K)
• No manual setup switches—automatically configured by software
• Low power consumption
Supported driver list:
• Windows Vista
™
x86
• Windows Vista
™
x64
• Microsoft Windows
®
XP (service pack 2)
• Microsoft Windows
®
Server 2003
• Microsoft Windows
®
2000 (service pack 4)
• Linux kernel 2.4.13 and higher stable version
• Microsoft Network Client for DOS (NDIS 2 driver)
• NetWare Client for DOS (ODI driver)
Note: The D-Link Network Control Program is not supported under Windows Vista
™
.
Features