4 Configuration DGS-1210 series Metro Ethernet Managed Switch User Manual
2
2
3
3
FTP path: Specify the FTP path where the firmware file located.
FTP File Name: Enter the file name which to be updated on the FTP server.
Click Backup to save the current firmware to the FTP server.
Click Restore after selecting the backup firmware file you want to restore.
CAUTION: Do not disconnect the PC or remove
the power cord from device until the upgrade
completes. The Switch may crash if the
Firmware upgrade is incomplete.
Flash Information
The Flash Information page displays the detail information of flash on the Switch.
Figure 4.10 – Tool Menu > Flash Information
Tool Bar > Online Help
The Online Help provides two ways of online support:
Figure 4.11 – Online Help
D-Link Support Site: This will lead you to the D-Link website where you can find online resources such as
updated firmware images.
User Guide: This can offer an immediate reference for the feature definition or configuration guide.
Click Apply to make configuration take effect.
Function Tree
All configuration options on the switch are accessed through the function menu on the left side of the screen.
Click on the setup item that you want to configure. The following sections provide more detailed description
of each feature and function.
To Next Page
Loading...
