4 Configuration DGS-1210 series Metro Ethernet Managed Switch User Manual
44
Click Add VID to create a new VID group, assigning ports from 01 to 10 as Untag, Tag, Forbidden or Not
Member. Enable or disable the VLAN Advertisement. A port can be untagged in only one VID. To save the
VID group, click Apply.
Figure 4.54 – Configuration > 802.1Q VLAN > Add VLAN
After click Apply, the 802.1Q VLAN Configuration Table will displayed with updates.
Figure 4.55 - Configuration > 802.1Q VLAN > Example VIDs
Click the VID number, the configuration of VLAN group which selected by user will displayed.
Change the port assignment then Click Apply to make the configurations take effect. User can also click the
Previous Page to the go back to the previous page.
Figure 4.56 - Configuration > 802.1Q VLAN > VID Assignments
To Next Page
Loading...
