D-Link DGS-1210-10 - VLAN > Voice VLAN > Voice Device List; VLAN > Auto Surveillance VLAN > Auto Surveillance Properties

4 Web-based Switch Configuration D-Link Smart Managed Switch User Manual
4
4
7
7
Figure 4.45 – VLAN > Voice VLAN > Voice VLAN Port Settings
From Port / To Port: A consecutive group of ports may be configured starting with the selected port.
Auto Detection: Switch will add ports to the voice VLAN automatically if it detects the device OUI matches
the Telephony OUI configured in Voice VLAN OUI Setting page. Use the drop-down menu to enable or
disable the OUI auto detection function. The default is Disabled
Tagged / Untagged: Tagged or untagged the ports.
Click Apply to implement changes made and Refresh to refresh the voice vlan table.
Note: Voice VLAN has higher priority tha
n any
other features even QoS. Therefore the voice
traffic will be operated according to Voice VLAN
setting and not impacted by QoS feature.
Note:
It is recommended setting the highest
priority for Voice VLAN to guarantee the quality of
VoIP traffic.
VLAN > Voice VLAN > Voice Device List
The Voice Device List page displays the information of Voice VLAN.
Figure 4.46 – VLAN > Voice VLAN > Voice Device List
Select a port or all ports and click Search to display the Voice Device information in the table.
VLAN > Auto Surveillance VLAN > Auto Surveillance Properties
The Auto Surveillance Properties page allows user to configure and display the ports surveillance VLAN
settings and information.