D-Link DGS-1210 Series - Page 7

1 Product Introduction DGS-1210 series Metro Ethernet Managed Switch User Manual
8
Console
Green
Solid
Light
Console on.
Blinking POST is in progress.
Light
off
Console off.
Fan Error
(for DGS-1210-28P/ME,
28MP/ME, 28X/ME, 28XS/ME,
52/ME, 52P/ME, 52MP/ME,
52MPP/ME)
Red
Solid
light
The fan has runtime failure and
is brought offline.
Pwr/PoE Max.
(for DGS-1210-10P/ME,
28P/ME, 28MP/ME 52P/ME,
52MP/ME, 52MPP/ME)
Red
Solid
light
The Pwr/PoE Max LED lights up
when the total PoE output of
Switch reached or exceeded 71
Watts for DGS-1210-10P/ME,
186 Watts for DGS-1210-
28P/52P/ME, 363 Watts for
DGS-1210-28MP/52MP/ME,
and 733 Watts for DGS-1210-
52MPP/ME.
In the meantime, no
additional PoE device can be
supported.
Light
off
When the system power usage
does not reach the guard band
range.
RPS
(DGS-1210-
10/12TS/20/28/28X/28XS/52/ME)
Green
Solid
Light
RPS power on.
Light
off
RPS power off.
LED Per
10/100/1000
Mbps
Copper Port
Link/Act
Green/Amber
Solid
Green
When there is a secure
1000Mbps Ethernet connection
(or link) at any of the ports.
Blinking
Green
When there is reception or
transmission (i.e. Activity—Act)
of data occurring at a
1000Mbps
Ethernet connected port.
Solid
Amber
When there is a secure
10/100Mbps Ethernet
connection (or link) at any of the
ports.
Blinking
Amber
When there is reception or
transmission (i.e. Activity—Act)
of data occurring at a
10/100Mbps Ethernet
connected
port.
Light
off
No link.
PoE Mode
Green
Solid
Light
Power feeding
Amber
Solid
Light
Error Condition
Off
Solid
Off
No Power feeding
LED Per SFP
Port
Link/Act
Green
Solid
Green
When there is a secure
1000Mbps Ethernet connection
(or link) at any of the ports.
Blinking
Green
When there is reception or
transmission (i.e. Activity—Act)
of data occurring at a 1000
Mbps
Ethernet connected port.