7
Enter IP address http://192.168.0.1
(the factory-default IP address
setting) to the address location. (Figure 2.)
Figure 2.
Or through the SmartConsole Utility, you do not need to remember the IP
Address, select the device shown in the Monitor List of the
SmartConsole Utility to settle the device on the Web Browser.
When the following dialog page appears, remain enter the default
password "admin" and press Ok to enter the main configuration window.
(Figure 3.)
Figure 3.
After entering the password, the main page comes up, the screen will
display the device status. (Figure 4.)
Figure 4.
To Next Page
Loading...
Need help?
General