8
Setup Menu
When the main page appears, find the Setup menu in the left side of the
screen (Figure 5). Click on the setup item that you want to configure.
There are following options: System Setting, Trap Setting, Port Setting,
SNMP Setting, Password Access Control, Jumbo Frame, 802.1Q VLAN,
Trunking, IGMP Snooping, 802.1D Spanning Tree, Port Mirroring, 802.1p
Default Priority, Safeguard Engine, Broadcast Storm Control, 802.1X
Setting, Static MAC, Dynamic Forwarding Table, Statistics as shown in
the Main Menu screen.
Figure 5.
To Next Page
Loading...
Need help?
General