24
Exit: To exit the Web Management Utility.
In the “View TAB”, there are view log and clear log function, this
function will help you to show trap setting.
View Log: To show the event of the Web Management Utility and
the device.
Clear Log: to clear the log.
In the “Option TAB”, there are Refresh Time function, this function
helps you to refresh the time of monitoring the device. Choose 15 secs,
30 secs, 1 min, 2 min and 5 min to select the time of monitoring.
In the “Help TAB”, there is About function, it will show out the
version of the Web Management Utility.
Configuring the Switch
The DGS-1216T Web Smart Switch has a Web GUI interface for
smart switch configuration. The Switch can be configured through the
Web Browser. A network administrator can manage, control and
monitor the switch from the local LAN. This section indicates how to
configure the Switch to enable its smart functions including:
Port Setting (Speed/Disable, Duplex mode, Flow Control)
Virtual LAN Group setting (VLAN)
Port Trunking
Port Mirroring
QoS
Jumbo frame
Spanning Tree
SNMP
System Setting
Device status and Statistic
To Next Page
Loading...
Need help?
General