37
management software. In addition to the standard MIB-II, the Switch
also supports its own proprietary enterprise MIB as an extended
Management Information Base. The proprietary MIB may also be
retrieved by specifying the MIB Object Identifier. MIB values can be
either read-only or read-write.
Enabled / Disabled: To selecting enable or disable SNMP function
on the Switch.
SNMP Community / Trap: To configure the SNMP Community or
SNMP Trap configuration.
Configure SNMP Community:
Figure 25. SNMP Community Setting
Add Group: To add a SNMP Community group, press “Add
Group” button, the Add SNMP Community configuration window
will pop out; fill in the community name and assign the community
enable read_only or read_write. Press “Apply” button to execute the
setting.
Figure 26. Add SNMP Community group
To Next Page
Loading...
