D-Link DGS-1224T - CONFIGURATION; Web Management Utility Setup

19
• Monitor Save As: To record the setting of the Monitor List
in an appointed filename and file path.
• Monitor Load: To manually load a Monitor List setting file.
• Exit: To exit the SmartConsole Utility.
View
includes: View log and Clear Log functions, which provide trap
setting list operations.
• View Log: To show the event of the SmartConsole Utility
and the device.
• Clear Log: To clear all log entries.
Option
includes: Refresh Time and Group Interval functions.
• Refresh time refreshes the monitoring time of the device.
Choices include 15 secs, 30 secs, 1 min, 2 min and 5 min for
selecting the monitoring time intervals.
• Group Interval establishes the intervals (in seconds) that the
Web-Smart Switch will be discovered in the SmartConsole
Utility Discovery List. It is different with Group Interval of
configuration setting dialog. In menu option Group Interval is
the setting for SmartConsole Utility, and Group Interval of
configuration setting dialog is the setting for switch.
NOTE: If the Group Interval is set to 0, IGMP snooping must be
disabled or else the Web-Smart Switch will not be discovered.