36
The default community strings for the Switch used for SNMP v.1
management access are:
Public: The community with read-only privilege allows
authorized management stations to retrieve MIB objects.
Private: The community with read/write privilege allows
authorized management stations to retrieve and modify MIB
objects.
Trap Setting: Traps are messages that alert network personnel of
events that occur on the Switch. Such events can be as serious as a
reboot (someone accidentally turned the Switch OFF), or less serious
events such as a port status change. The Switch can generate traps and
send them to the trap recipient (i.e. network administrator).
Setting up a Trap: Select Enable, enter a Trap Name (i.e. Trap Name
must be selected from a Community Name), add the IP of the device
to be monitored, and choose the event(s) to trap. The available trap
Events to choose from include: System Device Bootup, Fiber Link Up
/ Link Down, Fiber Abnormal Receive Error, Fiber Abnormal
Transmit Error, Twisted Pair Link Up / Link Down, Twisted Pair
Abnormal Receive Error, Twisted Pair Abnormal Transmit Error.
System > Password Access Control
Setting a password is a critical tool for managers to secure the Web-
Smart Switch. After entering the old password and the new password
two times, press Apply for changes to take effect. The new password
will be valid after user login again.
To Next Page
Loading...
