D-Link DGS-1224T - Firmware Upgrade and Web Access

24
Figure 11 – Password Change
Firmware Upgrade: When the device firmware is be upgraded, enter
the Firmware path and password (if necessary) to update.
Figure 12 – Firmware Upgrade
Web Access: Double click the device in the Monitor List or select a
device in the Monitor List and press the “Web Access” button to open
the Web-based Utility. To see the list of web browsers the Web-based
Utility supports, see Supported web browsers on page 20.
DHCP Refresh: select a device in the Discovery List or Monitor List
and press the “DHCP Refresh”, and enter the password (if applicable)
to trigger the Web-Smart Switch to request an IP address from a
DHCP Server.