DGS-3130 Series Layer 3 Stackable Managed Switch Hardware Installation Guide
65
Console Cable (RJ45 to RS-232)
A console cable is used to connect to the RJ45 console port of the Switch to access the command line interface. The
following diagram and table show the standard RJ45 to RS-232 cable and pin assignments.
Figure B-2 Console to RJ45 Cable
Contact Console (DB9/RS232) RJ45
1 Not Used Not Used
2 RXD Not Used
3 TXD TXD
4 Not Used GND
5 GND (shared) GND
6 Not Used RXD
7 Not Used Not Used
8 Not Used Not Used
To Next Page
Loading...
