D-Link DGS-3130 Series - Port Functions

DGS-3130 Series Layer 3 Stackable Managed Switch Hardware Installation Guide
62
Port Functions
Feature Description
RJ45 Ports Compliant with the following standards:
• IEEE 802.3 compliance
• IEEE 802.3u compliance
• IEEE 802.3ab compliance
• IEEE 802.3an compliance
• IEEE 802.3az compliance (Energy Efficient Ethernet)
Support Full-Duplex operations
• IEEE 802.3x Flow Control support for Full-Duplex mode
SFP Ports Compliant with the following standards:
• IEEE 802.3u compliance
• IEEE 802.3z compliance
SFP Transceivers Supported:
• DEM-210 (100BASE-FX, single-mode, 15 km)
• DEM-211 (100BASE-FX Multi-Mode, 2KM)
• DEM-310GT (1000BASE-LX, single-mode, 10 km)
• DEM-311GT (1000BASE-SX, multi-mode, 550 m)
• DEM-312GT2 (1000BASE-SX, multi-mode, 2 km)
• DEM-314GT (1000BASE-LHX, single-mode, 50 km)
• DEM-315GT (1000BASE-ZX, single-mode, 80 km)
• DGS-712 (1000BASE-T)
WDM (BiDi) SFP Transceivers Supported:
• DEM-220T (100BASE-BX-D, single-mode, 20 km, TX: 1550 nm / RX:
1310 nm)
• DEM-220R (100BASE-BX-U, single-mode, 20 km, TX: 1310 nm / RX:
1550 nm)
• DEM-330T (1000BASE-BX-D, single-mode, 10 km, TX: 1550 nm / RX:
1310 nm)
• DEM-330R (1000BASE-BX-U, single-mode, 10 km, TX: 1310 nm / RX:
1550 nm)
• DEM-331T (1000BASE-BX-D, single-mode, 20 km, TX: 1550 nm / RX:
1310 nm)
• DEM-331R (1000BASE-BX-U, single-mode, 20km, TX: 1310 nm / RX:
1550 nm)
SFP+ Ports Compliant with the following standards:
• IEEE 802.3ae compliance
• IEEE 802.3z compliance
All SFP transceivers and WDM (BiDi) SFP transceivers are supported in
SFP+ ports
SFP+ Transceivers Supported:
• DEM-431XT (10GBASE-SR, multi-mode, 10 km)
• DEM-432XT (10GBASE-LR, single-mode, 10 km)
• DEM-433XT (10GBASE-ER, single-mode, 40 km)
• DEM-434XT (10GBASE-ZR, single-mode, 80 km)
WDM (BiDi) SFP+ Transceivers Supported:
• DEM-436XT-BXD (10GBASE-LR, single-mode, 20 km, TX: 1330 nm /
RX: 1270 nm, without DDM)