D-Link DHP-1320 - Page 52

47D-Link DHP-1320 User Manual
Section 3 - Conguration
Member List:
Link Rate:
This section provides information on the PowerLine
AV devices in your PowerLine network, or any devices
that were previously connected but it are currently
disconnected.
Displays the device’s current data rate in Mbps.
Status:
Qos Settings:
Mac Address:
This field shows the status of the device. If the field
displays the word Connect, then the device is connected
to your PowerLine network. If the eld displays the word
Disconnect, then the device has been added to the
network but it is not ready. Please check its password and
make sure the device is
powered on.
You can congure your PowerLine AV devices to give
priority to powerline network trac accordingly. Enter the
name, MAC Address, and priority level.
You can nd the MAC address printed on the back of your
device.