25D-Link DIR-280 User Manual
Section 3 - Conguration
1. To enable WPA, WPA2, or WPA/WPA2, select either
Enable WPA Only Wireless Security (enhanced), Enable
WPA2 Only Wireless Security (enhanced), or Enable
WPA/WPA2 Wireless Security (enhanced).
2. Next to Cipher Type, select TKIP or AES.
3. Next to PSK/EAP, select PSK.
4. Next to Network Key, enter a passphrase. The key
is an alpha-numeric password between 8 and 63
characters long. The password can include symbols
(!?*&_) and spaces. Make sure you enter this key
exactly the same on all other wireless clients.
5. Click Save Settings to save your settings. If you are
conguring the router with a wireless adapter, you will
lose connectivity until you enable WPA, WPA2, or
WPA/WPA2 (whichever of the three options you have
selected above) on your adapter and enter the same
network key as you did on the router.
Security Mode (WPA, WPA2, WPA/WPA2):
To Next Page
Loading...
