D-Link DIR-280 - Access Control

29D-Link DIR-280 User Manual
Section 3 - Conguration
Access Control
Select Turn MAC Filtering OFF, Turn MAC
Filtering ON and ALLOW computers listed to access
the network, or Turn MAC Filtering ON and DENY
computers listed to access teh network.
Enter the MAC address you would like to lter.
To nd the MAC address on a computer, please refer
to the Networking Basics section in this manual.
Select a DHCP client from the drop-down menu and
click the arrow to copy that MAC Address.
Congure MAC
Filtering:
MAC Address:
DHCP Client
List:
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from
accessing the Network. You can either manually add a MAC address or select the MAC address from the list of clients that are
currently connected to the Broadband Router.