D-Link DIR-280 - LAN Setup

26D-Link DIR-280 User Manual
Section 3 - Conguration
This section will allows you to change the local network settings of the router and to congure the DHCP settings.
LAN Setup
Enter the IP address of the router. The default IP
address is 192.168.0.1.
NOTE:-If you change the IP address, once you
click Apply, you will need to enter the new IP
address in your browser to get back into the
conguration utility.
Enter the Subnet Mask. The default subnet mask
is 255.255.255.0.
Tick the box to transfer the DNS server information
from your ISP to your computers. If unchecked,
your computers will use the router for a DNS
server.
Router IP Address:IP Address:
Default Subnet
Mask:
Enable DNS Relay:
Refer to the next page for DHCP information.