D-Link DIR-280 - Device Administration

34D-Link DIR-280 User Manual
Section 3 - Conguration
Enter a new Login Name for the Administrator
account.
Enter a new password for the Administrator Login
Name and then retype the new password in the
Conrm Password textbox. The administrator can
make changes to the settings.
Remote management allows the DIR-280 to be
congured from the Internet by a web browser. A
username and password is still required to access
the Web-Management interface. In general, only a
member of your network can browse the built-in web
pages to perform Administrator tasks. This feature
enables you to perform Administrator tasks from the
remote (Internet) host.
Login Name:
Password:
Enable Remote
Management:
Port:
Device Administration
This window will allow you to change the Administrator password. This window also allows you to enable Remote
Management.
The port number used to access the DIR-280. For example: http://x.x.x.x:8080, where xxxx is the WAN IP address of the DIR-280 and
8080 is the port used for the Web-Management interface.