D-Link DIR-280 - Firewall & DMZ

31D-Link DIR-280 User Manual
Section 3 - Conguration
Check this box to enable DMZ.
Enter the IP address of the computer you would
like to open all ports to.
Tick this box to enable PPTP Passthrough.
Tick this box to enable L2TP Passthrough.
Tick this box to enable IPSec Passthrough.
Tick this box to enable DDoS.
Enable DMZ
Host:
DMZ IP
Address:
Enable PPTP
Passthrough
Enable L2TP
Passthrough
Enable IPSec
Passthrough
Enabled
DDoS:
Firewall & DMZ
This section will allow you to set up a DMZ host and to set up rewall rules.
If you have a client PC that cannot run Internet applications properly from behind the DIR-280, then you can set the client up for
unrestricted Internet access. This allows a computer to be exposed to the Internet. This feature is useful for gaming purposes. Enter
the IP address of the internal computer that will be the DMZ host. Adding a client to the DMZ (Demilitarized Zone) may expose
your local network to a variety of security risks, so only use this option as a last resort.