DIR-300 Wireless N 150 Home Router
User Manual
Configuring via Web-based Interface
Parameter Description
Enable RIP Select the checkbox to allow using RIP for this connection.
Enable IGMP Multicast
Select the checkbox to allow multicast traffic from the external
network (e.g. video streaming) to be received.
NAT
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Firewall
Select the checkbox to enable protection against ARP and DDoS
attacks.
Ping
Select the checkbox to allow the router to answer ping requests
from the external network through this connection. For security
reasons, it is recommended not to select this checkbox.
Figure 82. The page for creating a new connection. The VPN section.
Page 103 of 170
To Next Page
Loading...
