DIR-300 Wireless N 150 Home Router
User Manual
Configuring via Web-based Interface
Figure 94. The tab for adding a MAC address.
Click the Add button and enter an address in the field displayed. Also you can enter the MAC
address of a device connected to the router's LAN at the moment. To do this, select the relevant
device from the Known IP/MAC addresses drop-down list (the field will be filled in
automatically). Then click the Save button.
To remove a MAC address from the list of MAC addresses, select the checkbox located to the left
of the relevant MAC address and click the Save button.
Page 117 of 170
To Next Page
Loading...
