EasyManuals Logo

D-Link DIR-300 User Manual

D-Link DIR-300
170 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #136 background imageLoading...
Page #136 background image
DIR-300 Wireless N 150 Home Router
User Manual
Configuring via Web-based Interface
Figure 104. The page for editing the DDNS service.
You can specify the following parameters:
Parameter Description
DDNS Service
Select a DDNS provider from the drop-down list.
Host name The domain name registered at your DDNS provider.
User name
The username to authorize for your DDNS provider.
User password The password to authorize for your DDNS provider.
Interface
Select a WAN connection which IP address will be used to access
the DDNS service.
Update period
An interval (in minutes) between sending data with the IP address of
the interface specified in the field above to the relevant DDNS
service.
Click the Change button.
To edit parameters of the existing DDNS service, click the relevant service link. On the opened
page, change the needed parameters and click the Change button.
To remove an existing DDNS service, click the relevant service link. On the opened page, click the
Delete button.
Page 136 of 170

Table of Contents

Other manuals for D-Link DIR-300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DIR-300 and is the answer not in the manual?

D-Link DIR-300 Specifications

General IconGeneral
Frequency Band2.4 GHz
LAN Ports4 x 10/100Mbps
WAN Ports1 x 10/100Mbps
SecurityWEP, WPA, WPA2
Wireless Speed54 Mbps
Operating Temperature0 to 40 °C
Storage Temperature-20 to 65 °C
Humidity10% to 90% non-condensing
Wireless Standard802.11b/g
Antenna1 x External
StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.11b, IEEE 802.11g

Related product manuals