DIR-300 Wireless N 150 Home Router
User Manual
Configuring via Web-based Interface
Figure 49. Configuring PPTP + Dynamic IP WAN connection. The expert settings mode. The Miscellaneous
section.
Parameter Description
Miscellaneous
Enable RIP Select the checkbox to allow using RIP for this connection.
NAT
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Firewall
Select the checkbox to enable protection against ARP and DDoS
attacks.
Ping
Select the checkbox to allow the router to answer ping requests from
the external network through this connection. For security reasons,
it is recommended not to select this checkbox.
Click the Next button to continue.
After that the page displaying all specified settings opens. Click the Apply button to create the
connection or the Back button to specify other settings.
After clicking the Apply button, the page for checking the Internet availability opens (see the
Checking Internet Availability section, page 66).
Page 65 of 170
To Next Page
Loading...
