D-Link DIR-605 - Wireless Setup

20
D-Link DIR-605 User Manual
Section 3 - Conguration
Dynamic IP Address (DHCP)
Select Dynamic IP (DHCP) to obtain IP Address
information automatically from your ISP. Select this
option if your ISP does not give you any IP numbers
to use. This option is commonly used for Cable
modem services.
The Host Name is optional but may be required by
some ISPs.
Check the box if you are having problems obtaining
an IP address from your ISP.
Enter the Primary DNS server IP address assigned
by your ISP.
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is
the default MTU.
The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not
SFDPNNFOEFEUIBUZPVDIBOHFUIF EFGBVMU."$BEESFTT VOMFTTSFRVJSFECZZPVS*41:PVDBO VTFUIF $MPOF:PVS1$T
MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.
My Internet
Connection:
Host Name:
MAC Address:
DNS Addresses:
MTU:
Use Unicasting: