D-Link DIR-605 - System Settings

58
D-Link DIR-605 User Manual
Section 3 - Conguration
Use this option to save the current router
conguration settings to a le on the hard disk
of the computer you are using. First, click the
SaveCVUUPO:PVXJMM UIFOTFF BGJMF EJBMPH
where you can select a location and le name
for the settings.
Use this option to load previously saved
router configuration settings. First, use the
Browse control to find a previously save file
of configuration settings. Then, click the Load
button to transfer those settings to the router.
This option will restore all conguration settings
back to the settings that were in effect at the
time the router was shipped from the factory.
Any settings that have not been saved will be
lost, including any rules that you have created. If
you want to save the current router conguration
settings, use the Save button above.
Click to reboot the router.
This is to restore the device back to English version
only. Remove other languages installed for the
system web pages.
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to Factory
Default Settings:
Reboot Device:
Clear Language
Pack:
System Settings