D-Link DIR-605 - Port Forwarding

30
D-Link DIR-605 User Manual
Section 3 - Conguration
Enter the IP address assigned by your ISP.
Enter the Subnet Mask assigned by your ISP.
Enter the Gateway assigned by your ISP.
The DNS server information will be supplied by your ISP (Internet Service Provider.)
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1500 is the default
MTU.
The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended
UIBUZPVDIBOHFUIFEFGBVMU."$BEESFTTVOMFTTSFRVJSFECZZPVS*41:PVDBOVTFUIF$MPOF:PVS1$T."$"EESFTT button to replace
the Internet port’s MAC address with the MAC address of your Ethernet card.
IP Address:
Subnet Mask:
Default Gateway:
DNS Servers:
MTU:
MAC Address
Static IP Address
4FMFDU 4UBUJD*1 "EESFTTJGBMM UIF*OUFSOFUQPSUT *1JOGPSNBUJPOJT QSPWJEFEUPZPV CZZPVS*41:PVXJMM OFFEUP FOUFSJO UIF*1 BEESFTT
subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the
appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.