D-Link DIR-605 - LAN Setup

26
D-Link DIR-605 User Manual
Section 3 - Conguration
Select Static if your ISP assigned you the IP
address, subnet mask, gateway, and DNS server
addresses. In most cases, select Dynamic.
Enter the IP address (Static PPTP only).
Enter the Primary and Secondary DNS server
Addresses (Static PPTP only).
Enter the Gateway IP Address provided by your
ISP.
Enter the Server IP provided by your ISP
(optional).
Enter your PPTP username.
Enter your PPTP password and then retype the
password in the next box.
Select either Always-on, On-Demand, or
Manual.
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
Enter the Primary and Secondary DNS Server Addresses (Static L2TP only).
Address Mode:
PPTP IP Address:
PPTP Subnet
Mask:
PPTP Gateway:
PPTP Server IP:
Username:
Password:
Reconnect Mode:
Maximum Idle Time:
DNS Servers:
Russia PPTP
$IPPTF3VTTJB1151%VBM"DDFTTJGZPVS*41VTFTB1151DPOOFDUJPO:PVS*41XJMMQSPWJEFZPVXJUIBVTFSOBNFBOEQBTTXPSE
This option is typically used for DSL services.